500万彩票

服務熱線: 400-117-8816
           13406879330

ZHUANZHUYUNIUJIANXINGDIANDONGBANSHOU、NIUJIANXINGSHOUDONGBANSHOU、DINGNIUJUDIANDONGBANSHOU、NIUJUBEIZENGQIDEYANFAYUSHENGCHAN

熱門關鍵詞: 電動扳手能更快速地完成螺栓鏈接嗎? 重型應用螺栓完成平安快速扭緊和拆卸的處理計劃 工地用的電動扳手哪里有賣的,哪家質量好? 電動扭矩扳手必需恪守的硬性規則500万彩票

當前位置:首頁>新聞中心>大家知道氣動扳手和電動扳手的區別嗎?

大家知道氣動扳手和電動扳手的區別嗎?

來源:http://29xue.com 日期:2019-07-12 發布人:admin

  氣動扳手和電動扳手有什么區別?電動扳手螺絲松了怎么辦?異常碳火花的原因是什么?如何解決電動扳手不能正常使用的問題?別擔心,你想知道的都在這里。

  What's the difference between pneumatic wrench and electric wrench? What if the screw of electric wrench is loose? What's the cause of abnormal carbon spark? How to solve the problem that electric wrench can't be used properly? Don't worry, all you want to know is here.
  電動扳手是給電源或蓄電池供電的扳手,是擰緊高強螺栓的工具,又稱高強螺栓槍。它主要分為沖擊扳手、扭力扳手、扭矩扳手、角扳手、角扳手。
  Electric wrench is a wrench for power supply or battery supply, is a tool for tightening high-strength bolts, also known as high-strength bolt gun. It is mainly divided into impact wrench, torsion wrench, torque wrench, angle wrench, angle wrench.
  電動扳手是電源或蓄電池供電的扳手,是擰緊螺栓的工具。主要用于鋼結構安裝行業,專門安裝鋼結構高強螺栓,高強螺栓是用來連接鋼結構的接觸面,通常采用螺栓組的方式。
電動扭矩扳手
  Electric wrench is a wrench powered by power or battery and a tool for tightening bolts. Mainly used in the steel structure installation industry, special installation of steel structure high-strength bolts, high-strength bolts are used to connect the contact surface of steel structure, usually using the way of bolt group.
  電動扭矩扳手
  Electric Torque Spanner
  氣動扳手,又稱棘輪扳手與電動工具總組合,是一種以比較小的消耗提供高扭矩輸出的工具。它通過恒功率源加速一定質量物體的旋轉,然后立即擊中輸出軸,從而獲得相對較大的扭矩輸出。壓縮空氣是比較常見的動力來源,雖然也使用電力或水力。
  Pneumatic wrench, also known as ratchet wrench and electric tool combination, is a tool to provide high torque output with minimum consumption. It accelerates the rotation of a certain mass object through a constant power source, and then immediately hits the output axis, thus obtaining relatively large torque output. Compressed air is the most common source of power, although it also uses electricity or water.
  此外,氣動扳手可在每一個標準棘輪套筒驅動器大小,從小1/4“驅動工具包安裝和拆卸,多達3.5”。氣動扳手一般不適合緊固陶瓷和塑料零件的安裝件。
  In addition, the pneumatic wrench can be installed and disassembled up to 3.5% from 1/4 of the size of each standard ratchet sleeve driver. Pneumatic wrenches are generally not suitable for fastening ceramic and plastic parts.
  電動扭矩扳手
  Electric Torque Spanner
  電動扳手的螺絲松了
  The screw of the electric wrench is loose
  如果發現螺釘松動,應立即重新擰緊,否則電動扳手會失靈。
  If the screw is loose, it should be tightened again immediately, otherwise the electric wrench will fail.
  電機碳火花異常
  Abnormal Carbon Spark of Electric Machine
  應立即停止工作,進行檢查和處理,看碳刷是否干凈。故障排除。
  Work should be stopped immediately, checked and treated to see if the carbon brush is clean. Troubleshooting.
  出故障了
  It's out of order.
  確認現場連接的電源是否與電動扳手銘牌一致。是否有漏電保護器。如無異常或無法使用,應送相關品牌維修店檢查。
  Verify that the power supply connected on site is consistent with the nameplate of the electric wrench. Are there leakage protectors? If there is no abnormality or can not be used, it should be sent to the relevant brand repair shop for inspection.
  以上是電動扭矩扳手廠家為大家整理的相關內容,想要了解更多內容,歡迎訪問網站:http://29xue.com
  These are the related contents of the electric torque wrench manufacturer for you. For more information, please visit the website: http://29xue.com.

上海11选5 上海11选5 上海11选5 江西11选5 江西11选5 江西11选5 3D之家 3D之家